The “Original Spitznagel” Spot Weld Drill that applies the cutting pressure pneumatically. You do not have to push on the drill bit. Our patented valv... [read more]

The “Original Spitznagel” Spot Weld Drill that applies the cutting pressure pneumatically. You do not have to push on the drill bit. Our patented valv... [read more]

Don't use any other tool than this German made, German steel Weld breaker to separate freshly drilled panels. Use when spot welds are not completely d... [read more]

This C-clamp for the Spot Annihilator allows the technician to bring the drilling point three inches into the panel. Conveniently fits inside the delu... [read more]

Accesory Clamp for the Spot Annihilator. This deep Mega C-clamp allows the technician to bring the drilling point six inches into the panel. Perfect f... [read more]

This cup and screw attaches to the end of the C-Clamp of the DF-15 Spot Weld Drill Series to protect the c-clamp. It is opposite of the drill bit. Package of 5

This bit is our 6.5mm or approximately 1/4-inch High Speed Steel Cobalt (HSCO) spot weld bit. The twist is smaller than the shank which is 8.0mm and h... [read more]

This bit is our 8.0 mm or approximately 5/16th of an inch High Speed Steel Cobalt (HSCO) spot-weld bit. The twist is the same size as the shank which ... [read more]

This bit is our 10.0mm and the largest diameter High Speed Steel Cobalt (HSCO) spot-weld bit we offer. The twist is larger than the shank which is 8.0... [read more]

The Titanium coating on this bit will help prevent the bit from dulling due to overheating. The twist is the same size as the shank which is also 8.0m... [read more]

This is our most popular spot weld drill bit. 8.0mm or 5/16th is the most common size of spot welds that need to be removed. The Titanium coating on t... [read more]

8 mm or .314 inches. The Titanium Carbo Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits.... [read more]

The Boron Killer. The ONLY way to drill through Boron Steel is with this bit. This drill bit was created to specifically cut spot welds from Boron Ste... [read more]

5.0mm set screw to hold in drill bit on Spot Annihilator DF-15 series drills. Sold in a pakage of 10

Specifically designed for the rigors of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Centering nib prevents bit fr... [read more]

Specifically designed for the rigors of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Centering nib prevents bit fr... [read more]

When access is limited or obstructed either by a structural member or other component, we have a solution... “The Extender” is a spot weld drill bi... [read more]